Always wear non permeable, nitrile gloves when handling any UV gel product.
Only apply to healthy nails.
Apply in thin coats, do not overload the brush. Thick coats of product will not cure sufficiently. The more pigmented the colour, the thinner the coat should be.
Avoid all contact with skin. If contact with skin occurs, remove immediately.
Do not cure nails with product on the skin.
Use a 36W UV/LED lamp with a minimum of 365 + 405 nanometers to cure. Cure each coat for 99 seconds in low heat mode. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.
Remove gloves using a 'no touch method' i.e. do not pull from the fingertips where you could touch transferred product, pull down from the wrist, turning the glove inside out and dispose of in general waste. Always use a fresh pair of gloves for each client.
Always wash both yours and client's hands after application of final top coat and before use of cuticle oil.
Our products are for use by qualified nail professionals only.
Ingredients:
Urethane acrylate, Aliphatic Urethane Methacrylate, Isobornyl Acrylate, Isopropylidenediphenyl Bisoxyhydroxypropyl Acrylate, Dipentaerythritol Hexaacrylate, Methyl Benzoylformate, Partially Fluorinated Alkyl Ether.
+/- CI 7789, CI 15850:1, CI 15850:2, CI 19140,
CI 77491, CI 77499, CI 77007
